Ever turned your knob and wondered, “What’s with that my Yale lock clicking noise?”
It’s like your lock is trying to communicate with you, right? Well, don’t fret – that clicking noise is often just the sound of the tumblers doing their thing inside the lock. And it is actually completely normal.
But when does this innocent clicking turn into a cause for concern? If the clicking gets louder, or irregular, it’s time to fix it.
We’re exactly here to help you find out the reason behind this issue and provide step-by-step practical solutions to resolve this problem.
Yale lock clicking noise- is it normal?
The source of this clicking noise lies within the lock’s intricate mechanism.
The tumblers are small metal components inside the lock. They are responsible for securing or releasing the bolt. When you turn the knob, these tumblers fall into place, creating a distinctive clicking sound.
In most cases, this is not a reason to worry; it’s simply the lock doing its job.
Now, let’s get real. When does this clicking turn into a cause for concern? Scroll down!
When Should You Start Worrying?
While the standard clicking is expected, specific scenarios may indicate an issue that needs attention:
- Persistent Clicking: If the clicking becomes constant or unusually loud, it could be a sign of wear and tear within the lock mechanism.
- Difficulty Turning the Key: Resistance or difficulty in turning the key accompanied by clicking may indicate misalignment or internal issues.
- Clicking Without Key Turn: Clicking noises occur without any key movement. This could suggest loose components or internal instability.
Fix your Yale lock clicking noise issue?
Your Yale lock makes unexpected clicking noises because of the misalignment of the latch and strike plate, loose screws, or tightening of the mounting plate screws. Low battery may also cause this issue.
Anyway, we’ve covered all the solutions you can try to fix if your Yale lock clicking noise unexpectedly.
Step 1: Inspect for Misalignment
Begin by checking the alignment of the latch with the strike plate. If they are not aligned, the latch might hit the strike plate at an awkward angle. It causes the clicking sound.
- Open the door and examine the latch and strike plate.
- Loosen the screws on the strike plate slightly.
- Adjust the strike plate to ensure proper alignment with the latch.
- Tighten the screws securely and check if the clicking noise persists.
Step 2: Tighten Loose Screws
Over time, screws and other components may become loose and contribute to the clicking noise.
- Check the lock for any visibly loose screws or components.
- Tighten any loose screws using the appropriate screwdriver.
- Ensure all components are securely in place.
Step 3: Loosen the Mounting Plate Screws
Over time or due to low battery levels, the screws on your Yale Smart Lock’s mounting plate can be over-tightened. It leads to annoying clicking noise or connectivity problems.
This occurs because the excessive tension can impact the lock’s internal mechanisms.
In that case, you need to loosen the screws:
- Lift the hinges on each side of the lock to detach it from the door.
- Place the lock in a secure location for easy access during the troubleshooting process.
- Identify the screws securing the mounting plate to the door.
- Carefully loosen these screws, allowing the mounting plate to be moved slightly from side to side.
- While the screws are loose, gently wiggle the mounting plate to ensure it’s not too tight against the door.
- Finally, re-calibrate your Yale lock.
Step 4: Check the battery level
If the issue persists and your Yale Smart Lock is battery-powered, check the battery levels. Low batteries can contribute to performance issues. Replace them if necessary.
This simple step might resolve the clicking issue and ensure the smooth operation of your smart lock.
Step 4: Lubricate the Lock Mechanism
If the clicking noise persists, it might be due to dry or worn-out internal components. Lubricating the lock can often solve this issue.
- Purchase a silicone-based or graphite lubricant.
- Apply the lubricant to the keyway and other moving parts of the lock.
- Operate the lock several times to distribute the lubricant evenly.
Step 5: Seek Professional Assistance
If the clicking noise continues despite your best efforts, it’s advisable to consult a professional locksmith.
Read more problems on Yale lock not working
In the end, we can assure you that, a little Yale lock clicking noise here and there is usually nothing to worry about. It’s your lock’s way of staying in tune with the times.
But if it starts tapping a beat of its own, don’t be afraid to grab your DIY toolbox and utilize the DIY solutions we’ve covered.
After all, a happy lock makes for a peaceful home!