All About Kwikset programming code 917

Published No Comments on All About Kwikset programming code 917

Last updated on June 22nd, 2023 at 04:07 pm

Kwikset is a well-known brand in the world of door locks and home security.

They offer a wide range of products, from traditional deadbolts to smart locks that can be controlled with a smartphone.

One of the most common questions people have about Kwikset locks is how to program them.

In this article, we’ll be discussing the Kwikset programming code 917 and everything you need to know about it.

Kwikset programming Code 917: How to do it?

lock

Kwikset programming code 917 is a default code that is used to program certain Kwikset locks.

It is a six-digit code that is used to put the lock into programming mode.

Once the lock is in programming mode, you can enter additional codes to control the lock’s functions.

Even, using this programing code of kwikset 917, you can enable/disable programming code, delete or add user code, mute or unmute your lock.

Anyways, let’s get into the process that you can try to program your Kwikset code 917:

Enable/disable proramming code:

  1. First, ensure the door is open.
  1. Do you have enabled a programming code? If not, press and then release the program button. You may hear two beeps. To get access to the program button,
program button
  • Remove the interior cover of the lock.
remove back cover
  • Use a paper clip or Smart Key tool to access the program button.
access program button
  1. But, if you have enabled the programming code in your lock, type this programming code and then press the Kwikset button. You may notice a green flash with a short beep.
  1. Now press the 3 button. You may notice a green flash on the keypad with one short beep.
press 3
  1. Then press the Kwikset button.
kwikset button
  1. Type 4-8 digits of programming code on the keypad.
4-8 digit code

Note: This programming code will not be the same as any existing user code.

  1. Again, press Kwikset.
  2. Re-type the programming code on the keypad.
  3. Press Kwikset. If successful, You may notice a green flash on the keypad and hear one long beep.
green flash
  1. But, if you notice a red light flashing on the keypad with three beeps, the programming is unsuccessful. In that case, repeat steps 1 to 9.

Which Kwikset Locks Use Programming Code 917?

smart lock

Not all Kwikset locks use programming code 917. In fact, this code is only used on certain models. Here is a list of Kwikset locks that use programming code 917:

SmartCode 909

SmartCode 910

SmartCode 911

SmartCode 912

SmartCode 913

SmartCode 914

SmartCode 915

SmartCode 916

If you have one of these locks, you will need to use programming code 917 to put it into programming mode.

How to Use Kwikset Programming Code 917

Kwikset smart lock

Using Kwikset programming code 917 is relatively simple. Here are the steps you need to follow:

Step 1: Press and hold the kwikset button on the keypad for 5 seconds. The lock button is usually located in the center of the keypad and looks like a lock.

Step 2: Enter the default programming code, which is 917.

Step 3: The lock should beep and the keypad will flash to confirm that it is in programming mode.

keypad flash green

Step 4: You can now enter additional codes to control the lock’s functions. For example, you can enter a user code to create a new code for someone to use to unlock the lock.

Step 5: Once you have finished programming the lock, press the lock button again to exit programming mode.

Tips for Programming Your Kwikset Lock

Kwikset lock

Here are some tips to keep in mind when programming your Kwikset lock:

Choose a secure code: When creating user codes, make sure to choose a code that is difficult to guess. Avoid using easily guessable codes like 1234 or your birthday.

Test the lock: Once you have programmed the lock, test it to make sure it is working correctly. Make sure you can unlock the lock with the new code before giving it to someone else to use.

test the lock

Keep track of your codes: Make sure to keep track of all the codes you create for your lock. You may need to delete codes or add new ones in the future, so it’s important to have a record of all the codes.

What if I forget my Kwikset Programming Code 917?

If you forget your Kwikset Programming Code 917, you’ll need to perform a factory reset on your lock. This will erase all programmed user codes and return the lock to its default settings. To perform a factory reset, remove the battery pack from the lock, press and hold the Lock button while reinserting the battery pack, and continue to hold the button until the lock beeps twice.

How many user access codes can I program with Kwikset Programming Code 917?

No, the Kwikset Programming Code 917 cannot be changed. It is a fixed code that is used specifically for programming the SmartCode 917 lock.

How many user access codes can I program with Kwikset Programming Code 917?

With Kwikset Programming Code 917, you can program up to 8 user access codes for your SmartCode 917 lock. These codes can be 4-8 digits in length and can be deleted individually or all at once.

What should I do if my Kwikset SmartCode 917 lock isn’t accepting the Programming Code 917?

If your SmartCode 917 lock isn’t accepting the Programming Code 917, try resetting the lock and then try again. If that doesn’t work, check to make sure you’re using the correct Programming Code and that you’re following the programming steps correctly. If you’re still having trouble, contact Kwikset customer service for further assistance.

Is it safe to share my Kwikset Programming Code 917 with others?

No, you should not share your Kwikset Programming Code 917 with others. This code is used to program your lock and should only be known by you or trusted individuals who you have authorized to access your lock.

Can I use Kwikset Programming Code 917 on other Kwikset locks?

No, Kwikset Programming Code 917 is designed specifically for use with the SmartCode 917 lock. Other Kwikset locks may have different programming codes or methods.

Can I program my Kwikset SmartCode 917 lock using a mobile app?

Yes, some Kwikset SmartCode 917 locks can be programmed using the Kwikset mobile app. Check your lock’s user manual or contact Kwikset customer service to determine if your lock is compatible with the app and how to use it.

Do I need to change my Kwikset Programming Code 917 after programming my lock?

No, you do not need to change your Kwikset Programming Code 917 after programming your lock. This code is not used for unlocking or locking the lock, but rather for programming user access codes. If you need to change a user access code or add/delete a code, you can use the same Programming Code 917.

Conclusion

Kwikset programming code 917 is a default code that is used to program certain Kwikset locks. It is a useful tool for anyone who needs to program their Kwikset lock.

By following the simple steps outlined in this article, you can easily put your Kwikset lock into programming mode and start creating user codes to control the lock’s functions. Just remember to choose secure codes and keep track of all your codes in case you need to make changes in the future.

Leave a comment

Your email address will not be published. Required fields are marked *