Last updated on August 16th, 2023 at 11:33 am
If a Schlage keypad lock keeps spinning, then it is obvious that your Schlage lock won’t work or lock anymore. So, you may be wondering how to fix it.
Fortunately, this is a common problem that can be easily resolved with a few simple steps.
In this guide, we’ll walk you through the process of fixing a slipping keyless entry Schlage deadbolt lock, starting with the basic steps.
How to fix Schlage keypad lock keeps spinning
The problem with a slipping Schlage lock is usually caused by a loose or incorrectly placed spring that doesn’t pull the pin far enough to engage the lock.
The solution is to adjust the spring so that it pulls the pin higher up. This can be done by disassembling the lock and making some minor adjustments.
To start, you’ll need to gather some tools. You will need three different-sized bits to disassemble the lock, including a P2 standard Phillips head, a T15, and a T10. Once you have your tools ready, follow these simple steps:
Schlage keyless locks are a popular choice for those looking for a convenient and secure locking solution for their homes and businesses.
However, as with any technology, there may be issues that arise with the lock’s functionality.
One common issue that users have reported is that the Schlage lock keeps spinning, which can prevent the lock from properly engaging and securing the door.
How to stop the lock from spinning?
If you’re experiencing this issue with your Schlage lock, there are a few steps you can take to troubleshoot and fix the problem. Here’s a step-by-step guide to help you stop your Schlage lock from spinning:
Step 1: Check the spring-loaded pin
The first issue that may be causing your Schlage lock to spin is that the spring-loaded pin is not engaging with the cog. To check for this issue, you’ll need to remove the lock mechanism from the door.
Once you have the mechanism removed, check the spring-loaded pin to see if it is engaging properly with the cog. If it is not, you may need to adjust the pin or replace it entirely.
Step 2: Check the solenoid and elongated spring
Another possible issue that can cause the Schlage lock to spin is an elongated spring that prevents the solenoid from pulling up the arm to engage the pin. To check for this issue, you’ll need to remove the lock mechanism from the door.
Once you have the mechanism removed, check the solenoid and elongated spring to see if they are functioning properly.
If the spring is elongated, you can gently pull it out to let it relax before putting the mechanism back in place.
Step 3: Check the manual override of the keypad
The third issue that may be causing your Schlage lock to spin is the manual override of the keypad. This can be disabled if the little cam is turned down. To check for this issue, you’ll need to remove the lock mechanism from the door.
Once you have the mechanism removed, check the manual override of the keypad by inspecting the little cam. If it is turned down, you’ll need to turn it up to re-enable the manual override.
Step 4: Reassemble the lock mechanism
Once you’ve made the necessary adjustments, it’s time to put the lock back together.
Reattach the backplate and insert the screws using the P2 Phillips head bit.
Using the P2 Phillips head bit, remove the two screws located on the inside of the lock, near the latch.
The trickiest part of reassembling the lock is making sure the base plate is horizontal while the knob is vertical. To do this, insert the manual key to unlock the base plate, then re-lock it once it’s in the correct position.
Step 3: Remove the backplate
Once the screws are removed, you can take off the backplate of the lock by pulling it away from the door.
With the backplate removed, you will see the spring that controls the lock’s pin.
Use the T15-bit screwdriver to adjust the spring so that it pulls the pin higher up.
This will ensure that the pin engages with the lock and prevents it from slipping.
Conclusion
Overall, fixing a slipping keyless entry Schlage deadbolt lock is a simple process that can save you from having to replace your entire lock. With just a few tools and some minor adjustments, you can have your lock working like new again in no time.