Kwikset smart lock battery change troubleshooting

Published No Comments on Kwikset smart lock battery change troubleshooting
Kwikset-lock-not-working-after-battery-change

Last updated on May 24th, 2023 at 04:25 am

Kwikset Smart Locks are a popular and convenient way to secure your home. 

If you are stuck inside the room and the battery is dead then I have write another post about smart lock battery dies no key issue

Stay with me!

How to replace Kwikset door lock batteries

Let’s tell you the long journey short below then start them in detail

Kwikset smart lock battery change troubleshooting
  • Obtain the correct battery for your Kwikset lock.
  • Remove the lock cover.
  • Locate the battery pack.
  • Remove the old battery pack.
  • Insert the new battery pack.
  • Replace the lock cover.
  • Test the lock.

Step 1: Remove the battery cover

The first step to replacing the batteries in your Kwikset smart lock is to remove the battery cover from the back of the lock. 

To do this, locate the battery cover at the bottom of the lock and slide it down towards the base of the lock. 

This will release the cover from the lock, allowing you to remove it completely.

Step 3: Change Kwikset lock with tools

  • Check if you have a backup key. Most Kwikset locks come with a physical key that can be used as a backup in case of battery failure.
  • Look on the back of the lock or check your lock manual to see if there is a keyhole. If there is, use your backup key to unlock the door.

Using a paperclip:

  • Straighten a paperclip and bend one end into a small hook.
  • Insert the hook into the keyhole of the Kwikset lock.
  • Try to turn the hook to unlock the door.
  • If the lock does not open, try adjusting the angle of the hook or using a slightly larger or smaller hook.
  • Be careful not to damage the lock or hurt yourself when attempting to use a paperclip as a makeshift key.

Firstly, using a screwdriver, remove the screws that hold the interior cover in place on the lock. Gently slide the cover away from the lock.

For more troubleshooting using a screwdriver read this: how to open a deadbolt lock with a screwdriver

Next, slide the battery pack out of its slot. Take out the old batteries and replace them with fresh ones, ensuring that you confirm the correct polarity of the batteries before inserting them.

Insert the battery pack back into its slot and slide the interior cover back in place. Once it is properly aligned, secure all the screws back in place.

  • Locate the battery pack on your Kwikset lock.
  • Use a wrench to loosen and remove the nuts or bolts that are holding the battery pack in place.
  • Carefully remove the old battery pack from the lock mechanism.

Using this tool is tricky so I’m going to take you to the step by step processes.

Step 1: Get the Smart Key Force Tool

The Smart Key Force Tool is an essential tool for removing the lock cylinder from the lock. You can purchase it from a hardware store or online.

Step 2: Remove the Cylinder from the Lock

Insert the Tool into the small hole located on the lock’s underside. Push the tool up until you hear a click, and then pull the tool towards you to remove the lock cylinder.

Step 2: Remove the old batteries

Once you have removed the battery cover, you can now remove the old batteries from the lock. 

Remove the battery cover from the back of the lock cylinder.

Remove the old batteries and dispose of them properly. Insert four new AA batteries with the positive (+) and negative (-) sides facing the correct direction.

It is essential to dispose of the old batteries properly as they can be hazardous to the environment. 

You can dispose of them at a local recycling facility or follow the guidelines provided by your local waste management authority.

Step 3: Insert four new AA batteries

The Kwikset smart lock requires four AA batteries to operate. 

When inserting the new batteries, it is crucial to ensure that the positive (+) and negative (-) sides are facing the correct direction. 

The positive side of the battery should be facing upwards, and the negative side should be facing downwards.

Step 4: Reassemble the battery and test the lock

To do this, align the cover with the base of the lock and slide it up until it snaps into place.

You should hear a click sound indicating that the cover is securely attached to the lock.

Now, test the lock. Verify that the lock is functioning properly by locking and unlocking it with a key or code.

Tips for Replacing the Batteries in Your Kwikset

Here are some additional tips that can help you when replacing the batteries in your Kwikset smart lock

Safety tips for removing Kwikset battery lock 

The specific type of screwdriver or wrench you need will depend on the model of your Kwikset lock. 

Always refer to your lock’s user manual for specific instructions and recommendations on what tools to use. 

Additionally, it’s important to be careful when removing the old battery pack to avoid damaging the lock mechanism.

Use high-quality batteries

Kwikset locks are designed to work with alkaline batteries and it is not recommended to use rechargeable batteries. (source)

Rechargeable batteries have a lower output voltage and shorter lifespan, which can cause the lock to malfunction or fail to operate properly. To avoid any potential issues, it is best to use high-quality alkaline batteries and monitor the battery level closely.

Check the battery level regularly

Checking the battery level regularly can help you identify when the batteries need to be replaced. You can check the battery level using the Kwikset app or by looking at the lock’s status page.

Avoid using force: 

When replacing the battery cover, avoid using excessive force as it can damage the lock or the cover. Make sure the cover is aligned properly before sliding it up to snap it into place

https://www.kwikset.com/halo/faqs#:~:text=The%20Halo%20deadbolt%20is%20powered,chargeable%20or%20lithium%20ion%20batteries.

https://www.kwikset.com/support/answers/on-my-smartcode-the-batteries-drain-within-a-few-weeks

https://www.kwikset.com/support/answers/how-long-will-a-fresh-set-of-batteries-

last#:~:text=A%20fresh%20set%20of%20four,6%20months%20depending%20on%20usage

https://www.kwikset.com/support/answers/how-can-i-extend-the-battery-life-of-my-smart-lock

Leave a comment

Your email address will not be published. Required fields are marked *